Lasal MobiBed means the user can be both mobile and social.

The transporter can be used for resting, stabilising, supporting and yes of course, to transport the user around indoors. It creates many positioning options and is easy to adjust.

Ideal use for

– Children, young adults and adults with highly reduced
functional ability
– People who have difficulty sitting in the same position long
periods of time
– People with deformities, e.g. in the back or hip
– People with low muscle tone
– People who need to change position regularly, sitting down or lying down.


Everyone enjoys being part of the community

Regardless of any reduction in functional ability – and regardless of how few resources an individual has – all children and adults love to be part of the group. Immobile persons often experience that they are socially excluded. With a Lasal MobiBed the user can be both mobile and social. The personal transporter is used for resting, stabilising, supporting and transport indoors. It creates many positioning options and is easy to adjust. These options allow user to participate in activities, both in a reclining or sitting down position.

Lasal MobiBed is simple to adjust and operate with electrically driven adjustment of height, and back and foot support. The caretaker’s working posture is improved significantly because of the height adjustment. There are three length settings in the back section and three in the seat section, which allows up to nine length positions. The MobiBed also comes with step adjustable handlebar and with parking brake on the handlebar.

The personal transporter is not suitable for use outdoors, though it can be used on terraces and other similar paved level surfaces.

Accessories for positioning

We provide several products as accessories for positioning the user in Lasal MobiBed, among others belts, bedrails and insert cushions, which can be put together using clasps and visco elastic mattress with removable cover.

As a supplement for the insert cushions, we also provide a large range of positioning cushions from Lasal and Cobi. Combined the insert cushions and the positioning cushions allow a unique positioning for each user.

Insert cushions

The insert cushions are available in several sizes and models. The insert cushions are made from comfortable materials and have removable and washable outer covers. The core insert cushions have a water-repellent and antibacterial polyester cover.

In addition, the modules are equipped with a zip, so that the core filling can be varied as required. The removed filling is stored in a fabric bag. Since the small beads can easily spill out, it is recommenced that when removing them, a sheet is placed below the cushion.

The MobiBed is not crashtestet. Please read the following document about transporting the MobiBed in a vehicle.





Max. length with handlebar and foot support fully extended2150 mm
Max. width of Mobilia MobiBed measured across cushion frame bar720 mm
Height of cushion frame measured from floor to top of bar
Lowest position
Highest position
550 mm -> 830 mm
Cushion frame length (adjustable)
Min. length
Max. length
1460 -> 1830
Max. reclining dimension fully extended:
with Mobilia Mattress (person height max. 172 cm)
with Mobilia Module insert cushion (person height max. 180 cm)
1835 mm
1930 mm
Wheel base between front and rear wheel measured from the middle of axle to middle of axle720 mm
Total weight without insert cushion55 kg
Load capacity
Safety tested to
120 kg
Utilisation weight (max. person weight) recommended90 kg
Front wheel diameter200 mm
Rear wheel diameter300 mm
Actuator, motor, lift, back tilt and leg tilt - LINAK LA40-100 24 VLoad 4000 N
Control box - LINAK CA40 - SMPS - IPX624V
Built-in charger in control box. To charge connect:100V/240V
Manual control LINAK HB83 3-way
Minimum dimension, e.g. when packing for transport: The transporter is folded together and
lowered to the lowest position. The back is raised to maximum, the foot support is in the lowest
position and the handlebar is pushed fully forward.
Length: 1340 mm
Width: 720 mm
Height: 1070 mm


ProductLength cmWidth cmHeight cmGrey coverItem No.
Module MobiBed StandardMax 2150
Max height person 180

Module AB Back Cushion, size S506510/17/260316-4121-015
Module AB Back Cushion, size M646510/17/260316-4221-015
Module AB Back Cushion, size L 696510/17/260316-4321-015
Module C Seat Cushion, size S 486517/100316-4131-015
Module C Seat Cushion, size M626517/100316-4231-015
Module C Seat Cushion, size L686517/100316-4331-015
Module D Foot Cushion, unisize516510/17/260316-4141-015
Mattress, size S1486570316-4151-000
Mattress, size M1636570316-4251-000
Mattress, size L1836570316-4351-000


ProductLength cmWidth cmHeight cmGrey coverItem number
Triangle Cushion incl. cover6824210316-4531-015

Wedge Cushion incl. cover4564100316-4541-015
Gouda Wedge Cushion incl. cover3031,540316-4521-015
Neck Cushion incl. cover366,5100316-4511-015
Belt, size S125100316-6201-000
Belt, size L137100316-6221-000


Product information (PDF)
User manual (PDF)
Quick guide (PDF)
Presentation (PDF)

You may also like…