Lasal flotation cushions
Lasal flotation cushions are the perfect choice when you need cushions in water. Lasal flotation cushions are used for positioning during water training and others forms of water therapy. The cushions are used by users with neurology damage or users with a special need of support and stabilization in the water. The cushions flow effect and material ensure the user a safe and comfortable experience. The cushion flow also provides increasing mobility and stability during training in water. For therapists and assistants, the Lasal flotation cushions enhances the ability to perform exercises in the water, where otherwise two helpers would be needed.
The cushions come in different shapes and sizes.
Cleaning and maintenance
After use, rince the outer cover thoroughly in non-chlorinated water. When drying the flotation cushions must be placed with the blue mesh facing downwards. This allows the water to drain from the cushions. The cushions take quite a long time to drip dry and we therefore recommend use exclusively in “wet” environments.
The cushions can be hand washed with water and plain soap and drip dried or cleaned/disinfected with alcohol. Do not bleach or use fabric softener and other additives containing solvents on the cushions.
Flotation Cushions can be washed in a washing machine at max. 60°C. Due to its size and weight, Flotation Cushions must be washed in a washing machine large enough to handle the size of the cushions. Make sure to use a laundry bag with one cushion in each bag. The laundry bag must have fine mesh in order to protect the washing machine from the cushion filling. If the filling comes out of the cushion, the washing machine can be damaged.
Use ordinary detergent, but no fabric softener!
Flotation Cushions can be dried in a drying cabinet or in a dryer at a maximum of 60°C. When tumble drying use an intact laundry bag. The laundry bag must have fine mesh to protect the tumble drier from the cushion filling. If the filling comes out of the cushion, the tumble drier can be damaged. Temperatures above 70°C destroy the filling as the polystyrene beads melt above 71°C.
Flotation Cushions can be disinfected with a disinfectant with a PH value below 11.4. Note that Flotation Cushions must not be shared between users. Flotation Cushions should be dedicated to one single user at a time. This is done to avoid cross-contamination.
The fill material is made of flame retarded EPS beads (Expanded Polystyrene). Outside cover is made of 100% polyester, which are not flame retardant.
Follow link here to our entire range of positioning cushions .
Follow link here to flotation cushions on the Danish AssistData.